Arsip Blog

Diberdayakan oleh Blogger.

Selasa, 24 September 2013

Pressure Washing Tips For A Clean House

By Marla Mills


There are some houses which require pressure washing Alabama. This is the kind of activity which will require the homeowner to use high-velocity water spray for the sake of cleaning any dirt and residue from the house's exterior. This is the type of cleaning that is particularly necessary as a preparatory step for painting or repainting the house.

When the person decides to use pressurized water to clean the exterior of their residence, the first thing to think about is the type of washer to use. Remember that there are many types of washers available in the market these days. The person will have to choose according to the housing material used for the house.

If the individual finds the right washer to use for this task, then the individual will need to turn his or her attention to the fixtures that are in the way of the spray. The fixtures should be covered and protected against this pressurized water. Cover them with drop cloths and plastic coverings. Hold them in place using duct tape.

The cleaning will mostly focus on any mildew that are stuck on the wall. If this happens, make sure to start with manually scrubbing on those obvious mildew. This will help lower the amount of pressurized water to use for the cleaning. Using a plain scrub should be good enough to scrub the mildew off manually.

Of course, the homeowner will be using a cleaning solution for this. That is why it is recommended that the homeowner mixes the cleaning solution first before filling it into the detergent dispenser. One has to mix the non-phosphate concentrated cleaner with a few gallons of water for this important task.

Pick the right garden hose to use for the said task. The individual will need to secure the connection of the chosen garden hose to the water supply. The other end of the garden hose will need to be hooked to the washer. Once everything is set up, the next step that one will need to do is to turn the water faucet on.

Remember to check the pressurized water first before going through with the cleaning. The test for the pressurized water will have to be done starting from a three-feet distance away from the wall. Move bit by bit closer to the wall to check how strong the pressurized water is. Use the spray strong enough for removing dirt but not that strong to prevent damages.

Cleaning should be started from the top. After that, the individual will need to move the spray in a downward pattern. The individual will also have to spray on the available roof overhangs, underhangs, and gutters. Spray on these fixtures in a side-to-side, steady manner.

The homeowner will then need to rinse with plain water. To do this, the available garden hose will be useful as well. When rinsing, it is still recommended to go for it in a top down manner. After the homeowner finishes with the entire process for pressure washing Alabama, allow the cleaned wall to dry for at least two days before one proceeds with the painting or the repainting job.




About the Author:



Tidak ada komentar:

Posting Komentar

Followers

Copyright 2012 AUTO BLOG | Designed By Kang Mis.