Molds growing at your home are not a good experience that many want to face as times the molds may even be poisonous if they do not affect the health of the members in the home. Rather than be unsure and leave suspected molds growth unattended to, house owners are advised to use Mold Testing Illinois to test their presence so as to have them eliminated.
There are various types of the kits. The first type is known as the lift tape set. This is mainly used when one wants to confirm the exact type of molds. The kits are usually a sticky surface covered by a tacky surface which is removed and the sticky surface placed on the molds then covered again by the tacky surface. The tape is then taken to the lab for testing.
The next kit known as the instant kit on the other hand only tests the presence of the molds. It is also simple to use. It comes with a swab in a test tube. The swab is rubbed against the area suspected to have molds, then placed back in the test tube. It is allowed to remain in the tube for ten minutes, then the home owners checks the change in color on the tube and compares it with those on the color chart that is part of the kit.
The viable kit is the next type. It is the most common type used as it shows the presence of the molds as well as its strain. The kit consists of a swab and petri dish that contains some gel inside it. The swab is wiped on the suspected molds then rubbed over the gel in the petri-dish dish. The dish is then closed and the molds are allowed to germinate from between 3 to 7 days.
The viable kit also tests air quality. To do this, two kits will be required. One of the petri dishes will be placed outside next to the room where the other petri dish is to be placed. The dishes are then opened for an hour and later closed for 7 days for molds to grow. If the results in the petri dishes are the same, there is no need to worry however of they are very different, then laboratory tests will be required.
The same way of allowing the kit to let molds grow in 7days inside it if they are in the house can also be sued to test the heating and cooling house systems. The petri dish is placed in a vent that is furthest form the system itself. All the other vents are closed and the system is set to run non optimum performance for 10 minutes. The dish is then picked and closed and the normal process is done to check for molds.
Often people try to remove the molds on their own but this can cause more harm to them especially if the types of molds are those that are poisonous. People are thus advised to seek an expert to remove the molds for them rather than try to perform the service on their own.
Do not let molds grow in your home and ignore them as they will consequently have a negative effect on those in the home. Some common health effects include itchy and irritated eyes and frequent headaches. The molds may also irritate existing illnesses example asthma and skin diseases.
There are various types of the kits. The first type is known as the lift tape set. This is mainly used when one wants to confirm the exact type of molds. The kits are usually a sticky surface covered by a tacky surface which is removed and the sticky surface placed on the molds then covered again by the tacky surface. The tape is then taken to the lab for testing.
The next kit known as the instant kit on the other hand only tests the presence of the molds. It is also simple to use. It comes with a swab in a test tube. The swab is rubbed against the area suspected to have molds, then placed back in the test tube. It is allowed to remain in the tube for ten minutes, then the home owners checks the change in color on the tube and compares it with those on the color chart that is part of the kit.
The viable kit is the next type. It is the most common type used as it shows the presence of the molds as well as its strain. The kit consists of a swab and petri dish that contains some gel inside it. The swab is wiped on the suspected molds then rubbed over the gel in the petri-dish dish. The dish is then closed and the molds are allowed to germinate from between 3 to 7 days.
The viable kit also tests air quality. To do this, two kits will be required. One of the petri dishes will be placed outside next to the room where the other petri dish is to be placed. The dishes are then opened for an hour and later closed for 7 days for molds to grow. If the results in the petri dishes are the same, there is no need to worry however of they are very different, then laboratory tests will be required.
The same way of allowing the kit to let molds grow in 7days inside it if they are in the house can also be sued to test the heating and cooling house systems. The petri dish is placed in a vent that is furthest form the system itself. All the other vents are closed and the system is set to run non optimum performance for 10 minutes. The dish is then picked and closed and the normal process is done to check for molds.
Often people try to remove the molds on their own but this can cause more harm to them especially if the types of molds are those that are poisonous. People are thus advised to seek an expert to remove the molds for them rather than try to perform the service on their own.
Do not let molds grow in your home and ignore them as they will consequently have a negative effect on those in the home. Some common health effects include itchy and irritated eyes and frequent headaches. The molds may also irritate existing illnesses example asthma and skin diseases.
About the Author:
Find a list of the benefits you get when you use mold testing Illinois services and more info about a reputable service provider at http://www.moldprochicago.com/moldprochicago.com/mold-services today.
Tidak ada komentar:
Posting Komentar