Arsip Blog

Diberdayakan oleh Blogger.

Senin, 15 Agustus 2016

Various Categories Under Which A Car Wash Edmonton May Fall Under

By Marie Smith


Every person likes being associated with cleanliness. You will feel comfortable if your vehicle looks spotlessly clean and shiny. It does not make sense to wear very clean suits, while the vehicle looks dirty. Cleaning of cars is normally done in carwashes. However, there are other people, who have cleaning equipment in their home, meaning that they can wash their cars right away from home. Looking at types and condition of equipment used during cleaning is important before choosing a nice Car Wash Edmonton. You should also look at the condition of security around and within the carwash. Different categories of carwashes are discussed below.

Under the self service category, open bay is used during washing process. Open bays are areas where cars sit while being washed. Foaming brush and a pressure sprayer are used during the washing procedure. Foaming brush is normally connected to a central pump. Most sprayers in this case have dial system that is coin operated. The system is fitted with various options from, which one can choose depending on need. Some of options available are soap, wax and rinse.

Another category of carwash that is gaining popularity at a phenomenal rate is exterior rollover. The system is automated, making it very efficient. In order to wash your car, you are required to take it inside a given bay by simply driving it. A signal released, informs you when vehicle reaches a correct position. Washing is done certain pieces of equipment moves over vehicle. This category is gaining popularity day by day.

For exterior only category, vehicle is directed into a bay that looks like a tunnel. Within the tunnel, there is a conveyor belt over which, one of the tires, especially the front and the one nearest to the driver is positioned. The vehicle is then left neutral and washing process commences. The belt guides vehicle through the tunnel and after the cycle is completed, vehicle is left spotlessly clean.

Initial stages of full service category resembles those of exterior only system. However, towards the end, differences arise. During the last stages in full service category, attendants are involved. Attendants perform the role of cleaning wheels and also in hand drying. Detail shop is another common category of carwash. Under this category, entire cleaning process is done manually by attendants.

Washing the entire vehicle may take a long time especially when doing hand washing. Owing to this, consider washing interior part in the day before commencing exterior part. When cleaning the exterior part consider commencing from top part downwards. Doing cleaning from a shady environment is beneficial.

Immediately washing of the upper part of the vehicle is completed, consider commencing cleaning the wheels. The surface of wheels is usually different from those of other body parts. This crystal clearly means that different materials should be used to wash the wheels from the ones used to wash the upper part. Soap together with wheel brushes, make cleaning process successful.

Rinsing is done from the top of vehicle towards the bottom. The process may be repeated until required level of cleanliness is attained. When drying, consider using microfiber towels for better results. Once done with drying process, commence the polishing process in order to make the car look shiny. Wax is then applied for protection purposes.




About the Author:



Tidak ada komentar:

Posting Komentar

Followers

Copyright 2012 AUTO BLOG | Designed By Kang Mis.